Term
| According to the SRD Lab Handout, "Automated Mixing Techniques", a __________ is recording an initial automated mix in order to establish null points for any automatable features. |
|
Definition
|
|
Term
| According to the SRD Lab Handout, "Project Editing", the global page within Pro Tools that determines track inputs and outputs is the ___________. |
|
Definition
|
|
Term
| According to the SRD Lab Handout, "Project Mastering" and Lecture information presented, importing audio from the region bin, or selecting ________, are the most effective ways to import the final mix into the new mastering session. |
|
Definition
|
|
Term
| According to th SRD Lab Handout, Project Mastering" and Lecture information presented, when recording the final mastered mix to the HHB CDR-830, the ________ should always be monitored. |
|
Definition
|
|
Term
| You plan to decode an M-S array to tape on the AMEK 9098i. In order to create the duplicated of the Side microphone, the best scenario would probably be to _________. |
|
Definition
| Patch insert send of the original signal to the line amp of open I/O and flip that signal out of phase |
|
|
Term
| The ________ technique employs a pair of directional mic's with the capsules angled towards each other aiming at the left and right sides of the sound source. |
|
Definition
|
|
Term
| Which mic technique would allow for making a room or space sound much wider that it really is? |
|
Definition
|
|
Term
| What is the most important thing to check when using mulitple mics on an instrument? |
|
Definition
|
|
Term
| When recording a standard drum kit, which of the following should be checked? |
|
Definition
| Phase cancellation; condenser/dynamic mics; mics not in drummers way; pattern selection; rolloff filters |
|
|
Term
| The engineer asks you to set up a M-S Stereo microphone array using a pair of the same microphones. Which pair would be good to choose? |
|
Definition
|
|
Term
| What microphones, found in Studio A or B, have multiple pickup patterns? |
|
Definition
|
|
Term
| Why do we usually store analog tapes "Tails Out"? |
|
Definition
| To ensure print through occur after the actual sound source |
|
|
Term
| What is the function called that allows you to rewind or fast wind a tape at half-speed, allowing for a better pack of the tape for storage? |
|
Definition
|
|
Term
| Which componenet of a tape machine spins at the same speed tape is passing, converting this information into tach pulses for the comparitor circuit to read? |
|
Definition
|
|
Term
| A trapezoidal pattern appearing on the tape head typically indicates an alignment problem with the head's ________? |
|
Definition
|
|
Term
| To adjust for a +9 operating level with a 250 nWb/m MRL tape during repro calibration, the MTR's meters should read ________. |
|
Definition
|
|
Term
| To adjust for a +6 operating level during record calibration, the MTR's meters should read ________. |
|
Definition
|
|
Term
| The tones commonly used to adjust for record azimuth are ________ and ________. |
|
Definition
|
|
Term
| The most accurate method of adjusting repro azimuth is the ________ method. |
|
Definition
|
|
Term
| The Lexicon 960L can store registers on a ________. |
|
Definition
|
|
Term
| On the Lexicon 480L and 960L, a ________ refers to a user-defined set of parameters. |
|
Definition
|
|
Term
| To check or change the configuration on the Lexicon 480L, you must press the ________ button. |
|
Definition
|
|
