Term
EA Credit 1.1 Optimize Energy Performance Lighting Power |
|
Definition
Reduce lighting power density allowed by ANSI/ASHRAE/IESNA 90.1 by 15, 25 or 35% 1PT, 2PT 3PT 4 Potential Points Possible |
|
|
Term
Optimize Energy Performance Lighting Power Intent |
|
Definition
| Achieve increasing levels of energy consumption below the prerequisite standard to reduce environmental impacts associated with excessive energy use. |
|
|
Term
| Even though a lower wattage lamp may be used in a luminaire, the rated wattage of the luminaire must _______ |
|
Definition
| be used in the calculation. |
|
|
Term
| You have to ______ not just change the bulb wattage. |
|
Definition
|
|
Term
| In the ____________, areas enclosed by partitions 80% or greater than ceiling height may be considered as a separate area. |
|
Definition
|
|
Term
| In the SBS Method three situations that permit increase to the interior power allowances are: |
|
Definition
chandelier-type luminaires lighting connected with visual display terminals lighting in retail spaces
|
|
|
Term
| For potential use during submittal revies, it is suggested that the project team compile and maintain floor plans showing: |
|
Definition
the lighting layout the schedule of lighting copies of the cut sheets indicating the rated wattage (keep copies)
|
|
|
Term
| For EA Table 1 If you install less thatn allowed then calculate the difference. You can achieve 2 points if your difference is: |
|
Definition
|
|
Term
| Interior Lighting Power Allowance |
|
Definition
| is the maximum light power in watts allowed for the interior of a building |
|
|
Term
| Lighting Power Density (LPD) |
|
Definition
| is the maximum lighting power, per unit area, of a building classification of space function |
|
|
Term
|
Definition
| is a complete lighting unit consisting of a lamp or lamps together with the housing designed to distribute the light, position and protect the lamps and connect the lamps to the power supply. |
|
|
