Term
| Developed to perform common tasks that would require many lines of standard code to accomplish. |
|
Definition
|
|
Term
| What do you use canned cycles for? |
|
Definition
Hole-making operations such as
-DRILLING
-TAPPING
-BORING |
|
|
Term
| Cancel the can cycle is what GM code? |
|
Definition
|
|
Term
| Return tool to initial plane is what GM code? |
|
Definition
|
|
Term
| Return tool to retract plane is what GM code? |
|
Definition
|
|
Term
| The initial plane and the retract plane are used to... |
|
Definition
| Control vertical tool movement within the drilling cycle and between multiple holes. |
|
|
Term
| G99 is the preferred method to use when there are no... |
|
Definition
| Clearance problems or obstructions. |
|
|
Term
| A value stored in the offsets register in the control that will be used for automatic cutter compensation. |
|
Definition
|
|
Term
| The condition created when an arc touches another arc, curve, or line at only one point. |
|
Definition
|
|
Term
| An automatic method used to offset the cutting tool from the finished edge. |
|
Definition
|
|
Term
| Fixed point of rotation of an angle. |
|
Definition
|
|
