Term
| The FCR will provide reliable data while maneuvering up to __ degrees in roll and _____ degrees to ____ degrees in pitch. |
|
Definition
| The FCR will provide reliable data while maneuvering up to 20°in roll and + 20°to -15°in pitch |
|
|
Term
| The FCR has been selected as the active sight. The RFHO data position error data taken from both aircraft and/or FCR range deviation error data has exceeded optimum parameters to a magnitude that safety inhibits is implemented. What HAD sight status field message will be displayed? “ ___ ____ _______” Note: “DATA INVALID” displayed in weapon inhibit |
|
Definition
The FCR has been selected as the active sight. The RFHO data position error data taken from both aircraft and/or FCR range deviation error data has exceeded optimum parameters to a magnitude that safety inhibits is implemented. What HAD sight status field message will be displayed? “NAV DATA INVALID”
|
|
|
Term
| The GTM/RMAP wide scan sector is __ degrees, medium scan sector __ degrees, narrow scan sector ___ degrees and zoom scan sector ___ degrees. |
|
Definition
| The GTM/RMAP wide scan sector is 90 degrees, medium scan sector 45 degrees, narrow scan sector 30 degrees and zoom scan sector 15 degrees. |
|
|
Term
| Which FCR priority scheme emphasizes airborne and stationary ground targets? |
|
Definition
Which FCR priority scheme emphasizes airborne and stationary ground targets? A
|
|
|
Term
| Which FCR priority scheme emphasizes stationary ground targets? |
|
Definition
Which FCR priority scheme emphasizes stationary ground targets? B
|
|
|
Term
| Which FCR Priority scheme would you use if you expected to engage moving ground targets? |
|
Definition
Which FCR Priority scheme would you use if you expected to engage moving ground targets? C
|
|
|
Term
| The FCR always gives the highest priority to _____ regardless of Priority scheme. |
|
Definition
The FCR always gives the highest priority to
targets merged with an RFI emitter regardless of Priority scheme. |
|
|
Term
| Moving FCR target symbols become stale after__ seconds and stationary targets become stale after __ seconds. |
|
Definition
| Moving FCR target symbols become stale after 5 seconds and stationary targets become stale after 30 seconds. |
|
|
Term
| Selecting the RFI as the AQC source when the sight select is TADS or HMD will provide ______ and ______to the azimuth of the __ __________ |
|
Definition
| Selecting the RFI as the AQC source when the sight select is TADS or HMD will provide slaving and cueing to the azimuth of the #1 emitter |
|
|
Term
| A single scan burst in GTM narrow scan size will perform __ scans. |
|
Definition
| A single scan burst in GTM narrow scan size will perform 3 SCANS |
|
|
Term
| When a RF missile detects a moving target at distances between _____ and _____, the RF missile will radiate and attempt LOBL. |
|
Definition
| When a RF missile detects a moving target at distances between 500 METERS and 8 KM, the RF missile will radiate and attempt LOBL. |
|
|
Term
| Multiple scans within a scan burst use multiple detections of targets to improve detection and classification of both moving and stationary targets. This is known as ____ __ ____ ___________. |
|
Definition
| Multiple scans within a scan burst use multiple detections of targets to improve detection and classification of both moving and stationary targets. This is known asScan to Scan Correlation |
|
|
Term
| What does a flashing 3 second ANTS symbol indicate? |
|
Definition
What does a flashing 3 second ANTS symbol indicate?
That the ANTS target has out prioritized the frozen NTS. Note: the NTS becomes frozen solid diamond when the FCR is the selected line of sight and a weapon system has been actioned |
|
|
Term
| The 2ND TARGET INHIBIT Button (L6) is used to prevent secondary target information from being handed over from the FCR to the _______ RF missile during a ____________ target engagement. Is this button common to both crewmembers? _______ |
|
Definition
| The 2ND TARGET INHIBIT Button (L6) is used to prevent secondary target information from being handed over from the FCR to the PRIMARY RF missile during a STATIONARY target engagement. Is this button common to both crewmembers?YES |
|
|
Term
| In the ATM mode, the two numbers at the bottom center of the FCR page represent what? |
|
Definition
| In the ATM mode, the two numbers at the bottom center of the FCR page represent what? The upper and lower altitude of FCR coverage at maximum range referenced from aircraft/antenna EL settings |
|
|
Term
| A maximum of _____ RFI emitters can be displayed. |
|
Definition
| A maximum of 10 RFI emitters can be displayed. |
|
|
Term
| MTI ONLY enables the ____ only mode and is displayed when? |
|
Definition
| MTI ONLY enables the MTI ONLY mode and is displayed when FCR is in GTM/RMAP |
|
|
Term
| What are the requirements for a 2nd target to be handed over to the RF missile? |
|
Definition
What are the requirements for a 2nd target to be handed over to the RF missile?
1. The FCR is the selected sight and the FCR is used to detect the target.
2. The NTS target is a truly stationary target with a range of 3600 and 6000 meters.
3. The RF missile is the selected weapon for the engagement. 4. A second truly stationary priority target is in the vicinity of the NTS target. |
|
|
Term
| The ____ _______ _ switch is used to rapidly orient the FCR antenna toward an RFI detected emitter. |
|
Definition
| The CUED SEARCH switch is used to rapidly orient the FCR antenna toward an RFI detected emitter. |
|
|
Term
| How many FCR detected targets can be potentially merged with one RFI emitter? |
|
Definition
How many FCR detected targets can be potentially merged with one RFI emitter? THREE
|
|
|
Term
| A cued search performed on a ground target will result in the appropriate scan size, based on, Fine Detect or Course Detect, as long as the target is within the limits of ___________. If it is outside of that, a ___________ message will be displayed. |
|
Definition
| A cued search performed on a ground target will result in the appropriate scan size, based on, Fine Detect or Course Detect, as long as the target is within the limits of RMAP. If it is outside of that, a LIMITS message will be displayed. |
|
|
Term
| RFI number one emitter will be displayed with a _____ _____ _____ around the threat Symbol and target type. |
|
Definition
| RFI number one emitter will be displayed with a HOME PLATE SYMBOL around the threat Symbol and target type. |
|
|
Term
| After RFI emitters have ceased radiation for ___ _______ the symbols will change to _________ _____________ |
|
Definition
| After RFI emitters have ceased radiation for 30 SECONDS, the symbols will change to partial intensity |
|
|
Term
| The RFI can detect and process ______ _____ _______ ____ __________ ____ __ radar signals. |
|
Definition
| The RFI can detect and process PULSE, PULSE DOPPLER AND CONTINUOUS WAVE radar signals. |
|
|
Term
| Where will an uncorrelated RWR Detect Icon be displayed? |
|
Definition
| Where will an uncorrelated RWR Detect Icon be displayed?Identified by an icon being oriented directly in front of the ownship |
|
|
Term
| When the Radar Jammer is transmitting a __________ ___________ _______ in the center of the Ownship ICON will be present. |
|
Definition
| When the Radar Jammer is transmitting a FLASHING LIGHTNING BOLT in the center of the Ownship ICON will be present. |
|
|
Term
| Selecting the CUED SEARCH button will: |
|
Definition
Selecting the CUED SEARCH button will:
1. Orient the FCR antenna to the highest priority emitter or a selected emitter
2. Select the FCR targeting mode
3. Set the appropriate scan size
4. Conduct a scan to correlate the location of the RFI detected emitter |
|
|
Term
| What is the caution associated with use of the FCR TEMP ORIDE button? |
|
Definition
| What is the caution associated with use of the FCR TEMP ORIDE button? Continued operation with the FCR TEMP ORIDE button selected may cause permanent damage to FCR components |
|
|
Term
| The TSD page will display ______ type targets inside of the ASE footprint. |
|
Definition
| The TSD page will display ASE type targets inside of the ASE footprint. |
|
|
Term
| The TSD page will display ____ type targets outside of the ASE footprint. |
|
Definition
| The TSD page will display RFI type targets outside of the ASE footprint. |
|
|
Term
| What will happen if you press the Display Zoom switch on the RH Grip? |
|
Definition
| What will happen if you press the Display Zoom switch on the RH Grip?FCR targeting information will be zoomed 6:1 around the NTS |
|
|
Term
| When the FCR is the selected sight and RF missile seeker is in a track state and link is selected, the TADS LOS is aligned to the __________________ |
|
Definition
| When the FCR is the selected sight and RF missile seeker is in a track state and link is selected, the TADS LOS is aligned to the SEEKER LOS |
|
|
Term
| The RFI aborts environmental monitoring when pitch exceeds _______ degrees and roll exceeds _______ degrees. |
|
Definition
| The RFI aborts environmental monitoring when pitch exceeds +/- 35 DEGREES and roll exceeds +/- 20 DEGREES. |
|
|
Term
| To obtain "dynamic" RFI icon information, the crew should refer to the ____ or____ displays. |
|
Definition
| To obtain "dynamic" RFI icon information, the crew should refer to the TADS OR ASE displays. |
|
|
Term
| The FCR page Total Target Count Status Window readout is from __ __ _____ |
|
Definition
| The FCR page Total Target Count Status Window readout is from TOTAL NUMBER OF TARGETS DETECTED WITHIN THE SCANBURST |
|
|
Term
| The TSD ___________allows for the option of displaying low priority FCR detected targets or obstacles. |
|
Definition
| The TSD ATK PHASE allows for the option of displaying low priority FCR detected targets or obstacles. |
|
|
Term
| RFHOs may be engaged with ______________________ weapon system. |
|
Definition
| RFHOs may be engaged with ANY ONBOARD weapon system. |
|
|
Term
|
Definition
|
|
Term
|
Definition
| #1 EMITTER ACQUISITION-TRACKING |
|
|
Term
|
Definition
|
|
Term
|
Definition
|
|
Term
|
Definition
|
|
Term
|
Definition
|
|
Term
|
Definition
|
|
Term
|
Definition
|
|
Term
|
Definition
|
|
Term
|
Definition
| MERGED ADA STATIONARY LOBL |
|
|
Term
|
Definition
|
|
Term
|
Definition
| MERGED ADA STATIONARY LOAL |
|
|
Term
|
Definition
|
|
Term
|
Definition
|
|
Term
|
Definition
|
|
Term
|
Definition
|
|
Term
|
Definition
|
|
Term
|
Definition
|
|
Term
|
Definition
|
|
Term
|
Definition
|
|
Term
|
Definition
|
|
